View CLC030-081B8_9101486.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 ref.ce - p3412 04/16 data sheet introduction performance characteristics mechanical dimensions characteristic curves reliability packing specification precaution warranty action for failed product others use of this product p 2 p 3 p 5 p 6 p 9 p 10 p 11 p 14 p 14 p 14 p 15 citiled cob+ series 6. 7. 8. 9. 10. 11. CLC030-081B8
ref.ce - p3412 04/16 1. introduction 1 - 1. product description 1 - 2. features 2 this product (cob) is comprised of two different ccts, and is to be driven using the 2 terminals which are shown in page 5. clc030 - 081 b8 - 31 3 h3 h3 - 185 [1] [2] [3] [4] [5] [6] [1] [2] [3] [4] [5] [6] cri (ra) min.90 cool cct 3100k 1850k chromaticity range warm cct product nomenclature clc030 81 macadam 3step *1 product shape die count ? mechanical dimensions : 19.0 x 26.0 x 1.6 (mm) ? package structure : ceramic base chip on board ? ceramic base: : material az214t(certificate number 20140905-e356524) ? connection to heat sink : by holder + m3screw, thermally conductive glue ? cri (ra) : min.90 ? cool cct : 3,100k (if=450ma) ? warm cct : 1,850k (if=10ma) ? chromaticity range : 3-step macadam ellipse, the center refers to ansi c78.377:2011. *1 ? thermal resistance : 2.0c/w ? rohs compliant *1 it applies only to cool cct.
ref.ce - p3412 04/16 2. performance characteristics 2 - 1. electro optical characteristics 2 - 2. absolute maximum ratings 3 (tc=25c ) ra r9 x y min min min. typ. max. typ typ min. typ. max. 3100k 90 50 1,630 1,870 - 0.430 0.402 450.0 32.3 35.1 37.9 2.0 1850k 90 50 13 24 - 0.544 0.410 10.0 24.5 26.6 28.7 2.0 notes : 1. the tolerance of measurement at our tester is forward voltage +/-3%, v+/-10% , chromaticity(x,y)+/-0.005 and ra+/-1. cri (ra) product cord nominal cct luminous flux ( lm ) forward current (ma) voltage (v) thermal resistance rj-c ( c/w ) chromaticity CLC030-081B8-313h3h3-185 symbol rating pi 27.3 *1 if 720.0 *1 if min 8 ir 1 top -30 ~ +85 tst -40 ~ +100 tc 85 *2 tj 150 *3 *1. input power and forward current are the values when the led is used within the range of the derating characteristics in this data sheet. reverse current [ma] *2 refer to 3. mechanical dimensions for tc measurement point *3 tj = tc + rj-c x pi storage temperature [c] case temperature [c] operating temperature [c] junction temperature [c] parameter input power [w] forward current [ma] minimum current [ma]
ref.ce - p3412 04/16 2 - 3. chromaticity characteristics 4 0.36 0.41 0.46 0.40 0.45 0.50 0.55 y x color region center point 3100k(3sdcm) b.b. locus 3,100k 1,850k 3-step macadam ellipse 3100k ( 0.4301 , 0.4016 ) 5-step macadam ellipse 1850k ( 0.5436 , 0.4098 ) * color region stays within macadam 3-step ellipse from the chromaticity center. * is the angle between the major axis of the ellipse and the x-axis, and a and b are the major and minor semi-axes of an ellipse. (ref. iec 60081:1997 annexd) 0.00834 0.00408 53.17 0.0129 0.00685 57.28 ( tc=25 c ) color region nominal cct center point ( x, y ) oval parameter major axis a minor axis b ellipse rotation angle
ref.ce - p3412 04/16 3. mechanical dimensions 5 unit : mm tolerances unless otherwise specified : +/-0.3 marking 1 : serial no. marking 2 : *** ** * ** warm cct cri cool cct circuit diagram product series - + x 12 x 5 x12 x12 x12 x12 x 5 x11 internal control circuit warm color block = 10pcs of led cool color block = 71pcs of led
ref.ce - p3412 04/16 4. characteristic curves 4 - 1. forward current characteristics / temperature characteristics 6 0.36 0.38 0.4 0.42 0.44 0.46 0.42 0.46 0.5 0.54 y x (240ma) (10ma) (100ma) (50ma) 0 5 10 15 20 25 30 35 40 45 0 100 200 300 400 500 600 700 800 forward voltage [v] forward current [ma] 0 5 10 15 20 25 30 35 40 25 45 65 85 105 forward voltage [v] tc [ c ] (450ma) (10ma) (450ma) (10ma) 0 500 1000 1500 2000 2500 3000 3500 0 100 200 300 400 500 600 700 800 cct [k] forward current [ma] 0% 20% 40% 60% 80% 100% 120% 140% 160% 180% 0 100 200 300 400 500 600 700 800 relative luminous flux [a.u.] forward current [ma] 0 200 400 600 800 1000 1200 1400 1600 1800 2000 25 45 65 85 105 luminous flux [lm] tc [ c ] forward current vs. forward voltage forward current vs. relative luminous flux tc=25c tc=25c forward current vs. cct xy chromaticity profile tc=25c tc=25c case temperature vs. relative forward voltage case temperature vs. ralative luminous flux * characteristics data shown here are for reference purpose only. (not fuaranteed data) 80% 85% 90% 95% 100% 105% 110% 25 45 65 85 105 relative forward voltage [a.u.] tc [ c ] (450ma) 0.36 0.38 0.4 0.42 0.44 0.46 0.4 0.44 0.48 0.52 0.56 y x (450ma) (10ma) (100ma) 0 5 10 15 20 25 30 35 40 45 0 100 200 300 400 500 600 700 800 forward voltage [v] forward current [ma] (450ma) (10ma) (10ma) 0 500 1000 1500 2000 2500 3000 3500 0 100 200 300 400 500 600 700 800 cct [k] forward current [ma] 0% 20% 40% 60% 80% 100% 120% 140% 160% 180% 0 100 200 300 400 500 600 700 800 relative luminous flux [a.u.] forward current [ma] 60% 80% 100% 120% 25 45 65 85 105 relative luminous flux [a.u.] tc [ c ]
ref.ce - p3412 04/16 4 - 2. optical characteristics 7 if=450ma radiation characteristic 0% 20% 40% 60% 80% 100% x y 80 70 60 50 40 30 20 10 - 80 - 70 - 60 - 50 - 20 - 30 - 40 - 10 90 - 90 x y spectrum 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 380 430 480 530 580 630 680 730 780 radiative intensity [a.u.] wave length [nm] 3100k(if=450ma) 1850k(if=10ma) tc=25
ref.ce - p3412 04/16 4 - 2. optical characteristics (continued) 4 - 3. derating characteristics 8 if=10ma 0% 20% 40% 60% 80% 100% x y 80 70 60 50 40 30 20 10 - 80 - 70 - 60 - 50 - 20 - 30 - 40 - 10 90 - 90 case temperature vs. allowable forward current 0 100 200 300 400 500 600 700 800 25 45 65 85 105 125 forward current [ma] tc [ c ]
ref.ce - p3412 04/16 5. reliability 5 - 1. reliability test 5 - 2. failure criteria 9 ( tc=25c ) u defines the upper limit of the specified characteristics. s defines the initial value. note : measurement shall be taken between 2 hours and 24 hours, and the test pieces should be return to the normal ambient conditions after the completion of each test. total luminous flux v if =450ma u 1.2 if =450ma , tc=85c continuous operation test test item ta = 100 c 1000 hours ta = -40 c 1000 hours test condition -30 c 30 minutes C 85 c 30 minutes, 100 cycle tc=85c, 95 %rh for 500 hours thermal shock test high temperature storage test low temperature storage test moisture-proof test
ref.ce - p3412 04/16 6. packing specification 6 - 1. packing 10 an empty tray is placed on top of a 6-tier tray which contain 40 pieces each. (smallest packing unit: 240 pieces) a label with product name, quantity and lot number is placed on the upper empty tray. tray (dimensions: 310 x 210 x 12 mm / materials: electrically conductive ps) note: october, november and december are designated x,y and z. - forth letter: ce's control number e.g. 5035 4. quantity example of indication label 2. p.no. ( cutomer's p/n ) 3. lot no. 1. type e.g. CLC030-081B8-313h3h3-185 - first and second letter: last digit of the year e.g. 15 : year 2015 - third letter: production month e.g. 1 : january customer pass type p. no lot no q'ty : cl c *** - ****** - ******* : ****** : ******* : *** --- (1) --- (2) --- (3) --- (4) unit : mm product 40 pcs/tray 12mm 310mm 210mm
ref.ce - p3412 04/16 7. precaution 7 - 1. handling with care for this product - both the light emitting area and white dam over the light emitting area is composed of resin materials. please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail ( e.g. edge of reflector part) because the function, performance and reliability of this product are negatively impacted. - please be aware that this product should not come into contact with any other parts while incorporating in your lighting apparatus or your other products. 7 - 2. countermeasure against static electricity - handling of this product needs countermeasures against static electricity because this is a semiconductor product. - please take adequate measures to prevent any static electricity being produced such as the wearing of a wristband or anti - static gloves when handling this product. - every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine and conveyance unit) should be connected to ground and please avoid the product to be electric - charged. 7 - 3. caution of product assembly - regarding this product assembling on the heat sink, it is recommended to use thermal conductivity glue or grease, and please optimize the assembly conditions according to the specifications of the thermal conductivity glue or grease . please don't fix this product on heat sink by screw directly to prevent breaking ceramic substrate. in addition, please dont press with excess stress on the product while the assembly. and , the surfaces of thermal conductivity glue or grease, should be kept clean, therefore please remove pollution, fluid and oil on the surfaces. - roughness, unevenness and burr of surface negatively impact thermal bonding between the product and heat sink and increase heat thermal resistance between them. confidence of thermally and mechanical coupling between the product and heat sink might be confirmed by checking the mounting surface and measuring the case temperature of the product . - heat sink should be covered under the yellow resin area locating on the side of center light emitting area because it generates heat as same as emitting area. 11
ref.ce - p3412 04/16 7 - 4. thermal design - the thermal design to draw heat away from the led junction is most critical parameter for an led illumination system. high operating temperatures at the led junction adversely affect the performance of leds light output and lifetime. therefore the led junction temperature should not exceed the absolute maximum rating in led illumination system. - the led junction temperature while operation of led illumination system depends upon thermal resistance of internal led package ( rj - c), outer thermal resistances of led package, power loss and ambient temperature. please take both of the thermal design specifications and ambient temperature conditions into consideration for the setting of driving conditions. - for more information, please refer to application note "thermal management ". 7 - 5. driving current - a constant current is required as an applying driving current to this product. - electrical transient might apply excess voltage, excess current and reverse voltage to the product(s). they also affect negative impact on the product(s) therefore please make sure that no excess voltage, excess current and reverse voltage is applied to the product(s) . - please verify that the selected driver and dimmer switch can drive clc030 correctly. 7 - 6. electrical safety - this product itself is designed to cover ul requirements that may apply on the final product. however, the ul certification still needs to be granted as the final product level which is depending on the design structure, materials used and how the led is placed and fixed in the final product. therefore please confirm electrical safety and dielectric in final product. - component failures can be caused by excessive voltage . - discharge before handling this product . - esd sensitivity of this product is over 1000v (based on iec61000 - 4 - 2). 12
ref.ce - p3412 04/16 7 - 7. recommended soldering condition (this product is not adaptable to reflow process.) - for manual soldering please use lead - free soldering . soldering shall be implemented using a soldering bit at a temperature lower than 380c, and shall be finished within 5 seconds for one land. no external force shall be applied to resin part while soldering is implemented . next process of soldering should be carried out after the product has return to ambient temperature. - for soldering correction regarding soldering correction, above conditions shall be applied. contacts number of soldering bit should be within twice for each terminal as a correction. * citizen electronics cannot guarantee if usage exceeds these recommended conditions. please use it after sufficient verification is carried out on your own risk if absolutely necessary. 7 - 8. eye safety - the international electrical commission (iec) published in 2006 iec 62471 2006 photobiological safety of lamps and lamp systems which includes leds within its scope. when sorting single leds according to iec 62471, almost all white leds can be classified as belonging to either exempt group (no hazard) or risk group 1 (low risk). - however, optical characteristics of leds such as radiant flux, spectrum and light distribution are factors that affect the risk group determination of the led, and especially a high - power led, that emits light containing blue wavelengths, might have properties equivalent to those of risk group 2 (moderate risk). - great care should be taken when directly viewing an led that is driven at high current, has multiple uses as a module or when focusing the light with optical instruments, as these actions might greatly increase the hazard to your eyes. - it is recommended to regard the evaluation of stand - alone led packages as a reference and to evaluate your final product. 7 - 9. this product is not designed for usage under the following conditions. if the product might be used under the following conditions, you shall evaluate its effect and appropriate them. in places where the product might: - directly and indirectly get wet due to rain and/or at place with the fear. - be damaged by seawater and/or at place with the fear - be exposed to corrosive gas (such as cl2, h2s, nh3, sox , nox and so on) and/or at place with the fear. - be exposed to dust, fluid or oil and/or at place with the fear. - be put in the enclosed space with halogenated substance and/or gas (such as br, cl and so on). 13
ref.ce - p3412 04/16 8 . warranty ( 1) citizen electronics guarantees the term of the reliability test results and elementary substances of the supplies to be within the set conditions. please note that any accident/damage that occurs during or because of usage that deviates from the conditions contained in the specifications are not warrantable. ( 2) although citizen electronics will deliver products of quality assured by the terms included in these specifications, incorporation in actual machines, lifetime in actual use and another quality shall be confirmed sufficiently by customers. customers are responsible for ensuring quality and to meet the specifications such as with regard to the security / the performance to standards of safety / reliability of the finished product. ( 3) the use of this product is intended for use in general electronics such as business machines, communication equipment, audio - visual equipment, household electrical appliances and measurement devices, etc. ( 4) if this product is considered to be used in applications where high reliability is required and failure or malfunction have a direct influence on human life or health such as aerospace instrument, medical equipment, atomic energy control devices and so on, please contact citizen electronics beforehand . 9. action for failed product (1) if a failed product is found, action shall be taken after consultation between both sides. however , in cases where it is obvious that the relevant failed product is attributed to citizen electronics, action will be limited to product replacement delivery. ( 2) when a failed product is returned, the failure phenomenon should be specified in writing and attached. citizen electronics will review the condition promptly and report the result to the customer . 10. others (1 ) all matters of this product's quality with regard to the customer are mentioned in these specifications, and any matters which are not mentioned in these specifications in items stated prior to receipt shall lose efficacy. ( 2) when a question occurs about the contents of these specifications, please contact citizen electronics. in addition, if there is any discrepancy in the contents of these specifications, both sides shall handle the matter with gentlemanlike discussion . ( 3) please do not conduct any actions equal to reverse - engineering such as the disassembling or the analysis of this product without citizen's permission. please contact citizen directly without disassembling in any way if a failure is found in this product. ( 4) if this product is not returned within three weeks after this specification has been published, it is judged that the contents have been accepted. citizen micro humantech is a registered trademark of citizen holding co., japan . citiled is a registered trademark of citizen electronics co., ltd. japan 14
ref.ce - p3412 04/16 15 11. use of this product (1) this document is provided for reference purposes only so that citizen electronics' products are used as intended. citizen electronics neither makes warranties or representations with respect to the accuracy or completeness of the informatio n contained in this document nor grants any license to any intellectual property rights or any other rights of citizen electronics or any third party with respect to the information in this document. (2) all information included in this document such as product data, diagrams, charts, is current as of the date this document is issued. such information, however, is subject to change without any prior notice . before purchasing or using any citizen electronics' products listed in this document, please confirm the latest product information with a citizen electronics' sales office, and formal specifications must be exchanged and signed by both parties prior to mass production . (3) citizen electronics has used reasonable care in compiling the information included in this document, but citizen electronics assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. (4) absent a written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, citizen electronics assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, l oss of opportunities, business interruption and loss of data, and disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness fo r a particular purpose, accuracy of information, or no infringement . (5) though citizen electronics works continually to improve products' quality and reliability, products can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and safeguards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. in addition, customers are also responsible for determining the appropriateness of use of any information contained in this document such as application cases not only with evaluating by their own but also by the entire system. citizen electronics assumes no liability for customers' product design or applications . (6) please contact citizen electronics' sales office if you have any questions regarding the information contained in this document, or if you have any other inquiries. citizen micro humantech is a registered trademark of citizen holding co., japan . citiled is a registered trademark of citizen electronics co., ltd. japan
ref.ce - p3412 04/16 and are trademarks or registered trademarks of citizen holdings co., ltd. japan. is a trademark or a registered trademark of citizen electronics co., ltd. japan. 16

▲Up To Search▲

Price & Availability of CLC030-081B8

	To Download CLC030-081B8 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .